IPS Home Page
   
Low Noise & High Power Pump Lasers
IPS offers a full line of pump lasers for fiber and solid state laser pumping applications. Our unique spectrum stabilization technology allows us to "lock" the laser so that the wavelength is always in the absorption band.

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

IPS's single frequency pumps offer high power and are ultra-low noise - making them ideal sources for pumping DFB fiber lasers. Utilizing a low noise, high SMSR pump in high performance CW fiber lasers enables the realization of lower phase noise due to reduced pump induced thermal fluctuation.
IPS's 6 W spectrum stabilized multi-mode laser pumps provide wavelength locked pumping that remains "in the band - all of the time" without the need for costly and complicated temperature control. These sources eliminate the need for "binning" of like wavelength pumps, and therefore are more cost effective for use when total system integration costs are considered. But the most important characteristic that these sources provide is the ability to dramatically shorten the fiber length. By locking all of the power in the absorption band, pump light is absorbed more rapidly and more efficiently than traditional pump sources. This allows users to reduce the number of pumps required AND reduce the length of fiber used. In turn, this reduces the non-linear effects and aids in suppression of SBS.
976 nm Single Mode Pumps (Ideal for Low Noise and Core Pumping)
Product ID FWHM Spectral Width (nm) Output Power (mW) Fiber Connector Integral Photodiode Output Configuration Packaging Configuration
I0976SB0300P <0.001 300 None Yes Single Mode PM Fiber

 

14-pin BF Package

14-pin BF Package

I0976SB0300PA <0.001 300 FC/APC
I0976SB0500P <0.001 500 None
I0976SB0500PA <0.001 500 FC/APC
976 nm Multi-Mode Pumps (Designed for High Performance Cladding Pumping)
Product ID FWHM Spectral Width (nm) Output Power (mW) Fiber Connector Integral Photodiode Output Configuration Packaging Configuration
I0976MB4000M <0.25 4000 None Yes 105 micron core MM fiber

 

High Power BF Package

14-Pin High Power BF Package

I0976MB4000MF <0.25 4000 FC/PC
I0976MB6000M <0.25 6000 None
I0976MB6000MF <0.25 6000 FC/PC